Carbide Bit Touch, cone, with sharp tip, blue

Touch Carbide Drill Bit, Blue, Cone with Sharp Tip

This professional carbide burr with a cone and sharp tip is designed for fast and controlled removal of artificial veneers, architectural correction, and arch shaping. Medium hardness (blue abrasive) ensures high speed without chatter, while tungsten carbide guarantees wear resistance and consistent results even with intensive use.

Touch Carbide Drill Bit Features

• Medium abrasiveness (blue marking): effective removal of gel/polygel and quick shape correction.
• Cone with sharp tip: precise work in stress zones and along the arch; Careful approach to the side rollers.
• Tungsten carbide: High wear resistance, low heat generation with correct technique, long service life.
• Clean, smooth cut: Even material removal, minimal risk of overheating when following the cutting conditions.
• For experienced craftsmen: Not recommended for beginners due to the highly aggressive cutting.

How to use the Touch carbide burr

• Install the burr into the handle of the machine and securely fix it.
• Work at medium speeds, without applying excessive pressure, constantly moving the burr — Don't linger in one spot.
• Remove the coating, correct, and cut out the arch with light, smooth movements.
• When finished, clean the cutter and complete the entire process according to the salon's regulations.

Abrasiveness: Blue - medium hardness
Shape: Cone with a sharp tip (for removing, correcting, and cutting out the arch)
Material: Tungsten carbide (high wear resistance, reduced heat)