Carbide Bit Touch, cone, with sharp tip, green

Touch Carbide Drill Bit, Green, Cone with Sharp Tip

This professional carbide burr with a cone and sharp tip is designed for fast and controlled removal of artificial veneers, architectural correction, and arch shaping. The hard (green) abrasive ensures high speed and chatter-free operation, while the tungsten carbide guarantees wear resistance and consistent results even under intensive use.

Touch Carbide Drill Bit Features

• Hard abrasive (green marking): effective removal of gel/polygel and quick shape correction.
• Cone with sharp tip: precise work in stress zones and along the arch; Careful approach to the side rollers.
• Tungsten carbide: High wear resistance, low heat generation with correct technique, long service life.
• Clean, smooth cut: Even material removal, minimal risk of overheating when following the cutting conditions.
• For experienced craftsmen: Not recommended for beginners due to the highly aggressive cutting.

How to use the Touch carbide burr

• Install the burr into the handle of the machine and securely fix it.
• Work at medium speeds, without applying excessive pressure, constantly moving the burr — Don't linger in one spot.
• Remove the coating, correct, and cut out the arch with light, smooth movements.
• When finished, clean the cutter and complete the entire process according to the salon's regulations.