Gel for extension YouAreCute Builder Gel, #11, 15ml

Builder Gel in shade №11 by YouAreCute

Builder Gel №11 by YouAreCute is a professional light-curing gel for nail extension and strengthening. Medium consistency and pigmentation allow you to easily form an arch and align the nail plate, providing a long-lasting and aesthetic coating. The acid-free formula eliminates burning in the lamp, and the shock-absorbing properties make the material resistant to impacts and damage.

Advantages of Builder Gel №11

• A durable and elastic gel for modeling and strengthening nails.
• Medium consistency and pigmentation — easy alignment and covering of the free edge.
• Acid-free formula, does not cause burning during polymerization.
• Shock absorption - the material does not crack or break.
• Suitable for the "upper forms" technique and without filing the nail.
• Thixotropic - becomes less frequent when moving the brush; can be heated for ease of use.
• Full polymerization in 120 seconds with a UV/LED lamp 36-48 W.
• Permissible coating thickness - up to 0.5 mm at the edge and 1 mm at the apex.

How to use Builder Gel #11 extension gel

• Removing the old coating and preparing the nail (leave 2 mm of the form, which we will remove after leveling).
• Filing with a 220 grit file or a 100 grit buff without strong pressure.
• Manicure; when working with removers, wash your hands thoroughly with soap.
• Degreasing the nail with Nail Prep in two steps using 4 napkins (one for 5 fingers).
• If necessary — primer, if the Rubber Base substrate has sufficient acidity, you can not use it.
• Apply Rubber Base with a flat brush, draw all the sinuses of the nail, dry for 60 seconds.
• Erase the stickiness, level the Builder Gel with an indent of 0.5-1 mm from the cuticle, dry for 60 seconds.
• Filing the shape after leveling to form the thickness of the free edge.
• For thin nails — file 1 mm of the natural nail from the inside to avoid curling and peeling.
• Apply top coat, dry for 120 seconds, do not wipe after polymerization to preserve shine.
• For classic extension: install the form, lay out transparent gel, dry for 30 seconds, file the free edge, apply Rubber Base to problem areas, level with gel and final polymerization for 120 seconds.