Premium Gel for Nail Extension Luna Moon #3, 30 ml

Gel for extension and strengthening Premium Gel №3 from Luna Moon

Premium Gel №3 from Luna Moon is a classic polymer gel for extension, combining the strength of acrylic and the elasticity of gel. Contains photoinitiators that provide reliable curing under UV/LED lamp and allow to significantly lengthen the nail plate, creating a strong architecture without shrinkage.

Features of the gel for extension and strengthening Premium Gel №3 from Luna Moon

• Acid-free formula, safe for natural nails
• Cushioning does not crack when struck
• Medium consistency and thixotropy; does not flow and is self-leveling
• Medium pigmentation, covers the free edge
• Suitable for the “no filing” technique and work on upper forms
• Does not cause burning during polymerization
• Changes viscosity depending on temperature: thickens in the cold, liquefies in the heat
• Hard at a thickness of ≥1 mm, holds the arch well without shrinkage
• Requires a backing made of Rubber Base LUNAmoon
• Polymerization at a wavelength of 365-405 nm, power 36-48 W — 120 seconds

How to use for strengthening Premium Gel №3 from Luna Moon

1. Remove the old coating and, if necessary, leave 2 mm of length for alignment.
2. Finish the shape with a 220 grit file or a 100 grit buff, lifting the scales of the nail plate.
3. Do a manicure and, when working with a remover, wash your hands with soap.
4. Degrease the nail with Nail Prep LUNAmoon in two steps (4 napkins).
5. If desired, apply a primer.
6. Apply a thin layer of Rubber Base LUNAmoon, rubbing movements, and dry for 60 s.
7. Erase the stickiness and level the Premium Gel, retreating 0.5-1 mm from the cuticle; dry for 60 sec.
8. File the shape to create a thickness of 0.5 mm on the free edge.
9. For thin nails, file 1 mm of the plate from the inside to avoid curling.
10. Erase the sticky layer and apply gel polish if desired; dry for 60 sec.
11. Apply top coat and dry for 120 sec without wiping.

How to use for extension Premium Gel №3 by Luna Moon

1. Shorten the length of the nail to 1 mm, give it a round shape.
2. File with a 220 grit file or a 100 grit buff.
3. Do a manicure and wash your hands when working with the remover.
4. Degrease the nail with Nail Prep LUNAmoon (2 approaches).
5. Apply LUNAmoon primer.
6. Apply a thin layer of Rubber Base LUNAmoon, dry for 60 sec.
7. Set the top form to the desired length and architecture.
8. Put Premium Gel into the form, press it to the nail; dry for 30 sec.
9. Remove the form, file the free edge and shape it.
10. Erase the sticky layer and, if necessary, apply Rubber Base to the filed areas, dry for 30 sec.
11. Align with Premium Gel, clamp in the lamp for 10-15 sec, then dry for 120 sec.
12. Erase the stickiness before applying the top coat; apply top coat and dry for 120 sec without wiping.

Polymerization at a wavelength 365-405 nm, power 36-48 W - 120 seconds