Jelly Gelly for Modeling and Extension Luna Moon #4, 15 ml

Gel-jelly for modeling and extension Jelly Gelly №4 by Luna Moon

Gel-jelly Jelly №4 by Luna Moon is a material with a thick jelly-like texture, ideal for modeling the nail plate, extension of corners and creating volumetric designs. Due to its plasticity, you can lay out the shape so that you don’t have to file your nails, which significantly speeds up the procedure.

Features of Jelly Gelly Gel for modeling and extensions Jelly Gelly №4 from Luna Moon

• Thick jelly-like consistency
• Low-temperature composition does not cause burning during polymerization
• Excellent arch holding and does not deform
• Acid-free and hypoallergenic
• Medium pigmentation, covers the free edge
• Suitable for extensions “on top forms”
• Thixotropic liquefies when moving the brush, thickens in the cold
• Can be additionally heated for more liquid consistency
• Hard and durable, does not shrink
• Requires a backing made of Rubber Base LUNAmoon
• Cured in a UV/LED lamp (365-405 nm, 36-48 W) — 120 sec
• Acceptable coating thickness: 0.5 mm at the end, 1 mm at the apex

How to use Jelly Gelly №4 for strengthening by Luna Moon

1. Remove the old coating, if necessary, leave 2 mm of natural nail for alignment.
2. Finish the shape with a 220 grit file or a 100 grit buff, lifting the scales of the plate.
3. Do a manicure and wash your hands after working with the remover.
4. Degrease the nail with Nail Prep LUNAmoon in two steps (4 napkins).
5. Apply a primer if desired.
6. Apply a thin layer of Rubber Base LUNAmoon, rubbing into the sinuses, and dry for 60 sec.
7. Erase the stickiness and level with Jelly Gelly gel, retreating 0.5-1 mm from the cuticle; dry for 60 sec.
8. File the shape to form a thickness of 0.5 mm on the free edge.
9. For thin nails, file 1 mm of the plate from the inside to prevent curling.
10. Erase the sticky layer and apply gel polish if necessary; dry for 60 sec.
11. Apply top coat and dry for 120 sec without wiping.

How to use Jelly Gelly Gel №4 for nail extensions by Luna Moon

1. Shorten the nail to 1 mm and shape it into a round shape.
2. File with a 220 grit file or a 100 grit buff.
3. Do a manicure and wash your hands after removers.
4. Degrease the nail with Nail Prep LUNAmoon (2 approaches).
5. Apply LUNAmoon primer.
6. Apply Rubber Base LUNAmoon, dry 60 sec.
7. Set the upper form to the desired length and architecture.
8. Put Jelly Gelly into the form, press it to the nail; dry for 120 sec.
9. Remove the form, file the free edge and shape.
10. Erase the stickiness and, if necessary, adjust the Rubber Base on the filed areas; dry for 30 sec.
11. Apply design gel polish (60 sec) and top (120 sec) without wiping.

Curing in UV/LED lamp (365-405 nm, 36-48 W) - 120 sec