Polygel do przedłużania paznokci Luna Moon #8, 30 ml

Poly Gel №8 for nail extensions from Luna Moon

Poly Gel №8 from Luna Moon is a modern material that combines the strength of acrylic and the elasticity of gel. Ideal for strengthening, restoring and extending nails, allows you to create voluminous designs and work with upper forms. Thanks to the static texture, it does not flow and retains its shape, which makes it possible to lay out several nails at once and create a flawless French manicure.

Features of Poly Gel №8 from Luna Moon

• Suitable for strengthening, restoration and extensions, working with upper forms
• Does not flow or “float” from hand temperature
• Ideal for French manicure and voluminous designs
• Static material: you can work with 4 nails at the same time
• Hypoallergenic, suitable for allergic clients
• Harder than polygels with glitter inclusions — requires an even layer thickness
• Easy to dust, dust settles evenly
• Curing in a UV/LED lamp (365-405 nm, 36-48 W) for 120 sec

How to use the Poly Gel for strengthening №8 by Luna Moon

1. Removing the old coating and manicure.
2. Finish the shape with a 220 grit file or a 100 grit buff, lifting the scales of the plate.
3. Remove dust with a brush and degrease the nail with Nail Prep LUNAmoon (2 approaches, 4 wipes).
4. Apply a primer if desired.
5. Apply a thin layer of Rubber Base LUNAmoon with a flat brush, rubbing in; dry for 60 sec.
6. Wipe off the stickiness and apply Poly Gel with an orange stick, leveling the surface.
7. When working close to the cuticle, leave a gap of 0.5-1 mm; dry for 120 sec.
8. File the shape to create a thickness of 0.5 mm on the free edge.
9. Erase the sticky layer.
10. If necessary, apply gel polish for design, dry for 60 sec.
11. Apply top coat, dry for 120 sec without wiping.

How to use Poly Gel for extensions №8 from Luna Moon

1. Reduce the length of the nail to 1 mm, form a round shape.
2. File with a 220 grit file or a 100 grit buff, lifting the scales.
3. Manicure and degreasing Nail Prep LUNAmoon in 2 steps.
4. Apply LUNAmoon primer.
5. Apply the base of Rubber Base LUNAmoon with a flat brush, dry for 60 sec.
6. Install the upper form of the desired architecture and length.
7. Put Poly Gel into the form, press it to the nail; dry for 120 sec.
8. Remove the form and file to create a thickness of 0.5 mm on the free edge.
9. If necessary, file 1 mm of the natural nail from the inside to prevent curling.
10. Erase the sticky layer and remove dust after filing.
11. If necessary, adjust the Rubber Base in the filed areas, dry for 30 sec.
12. Apply gel polish for design (60 sec) and top (120 sec) without wiping.

Cymerization in UV/LED lamp (365-405 nm, 36-48 W) for 120 sec